Køleloft

layer

Type WK-D-UM

Chilled Ceiling Elements, type WK-D-UM are designed for the control of internal heat loads, where the energy benefits of cooling by means of water are required. A high cooling capacity per unit area provides a low cost solution to the local indoor environment. The WK-D-UM chilled ceiling element consists of a copper tube meander which is flattened and press-clipped into a perforated support plate. The flattened copper tube provides improved contact with the rear of the metal ceiling tile.
 
This installation method ensures good radiant exchange between the ceiling tile and the support plate which improves thermal performance without influencing the acoustic characteristics of the suspended ceiling. Specially shaped fixing straps (2 per ceiling tile) hold the element in place in the ceiling tile. The WK-D-UM chilled ceiling element is also suitable for use with plasterboard ceilings.

læs mere

layer

Type WK-D-WF

  • Convective chilled ceiling elements
  • Attractive curved shaped profiles
  • Installed as freely suspended elements (plank style)
  • Can be combined with grid ceilings
  • Also with mineral fibreboard for sound absorption
  • Can be installed above open grid ceilings
  • Project bespoke design

læs mere

layer

Type WK-D-UL

Chilled ceiling elements type WK-D-UL are designed for the dissipation of internal heat loads, where the energy benefits of cooling by means of water are required. A high cooling capacity per unit area provides a low cost solution to the indoor environment.
 
In particular the WK-D-UL cooling elements can be used with metal ceiling tiles provided by the customer, of all standard designs; they can also be combined with plasterboard ceilings. In the case of a continuous radiant chilled ceiling, approx. 55 % of the internal load is dissipated by radiation and approx. 45 % by convection.
 
The WK-D-UL cooling elements consist of thermal conduction bars into which a pipe meander is pressed in such a way that total contact is ensured; this guarantees optimum thermal conduction. To ensure proper contact with the ceiling tiles, the thermal conduction bars are fitted with a magnetic strip which is inserted in the centre in the case of steel tile ceilings, and with doublesided adhesive tape in the case of aluminium ceiling tiles and plasterboard ceilings.

læs mere

Del siden

Anbefal denne side

Her har du mulighed for at anbefale denne side videre som link.

Felter markeret med stjerne (*) er påkrævede.

Kontakt

Mange tak for meddelelsen!

Din anbefaling er sendt, og vil snarest blive leveret til modtageren.


Kontakt

Vi hjælper dig gerne

Visual contact Visual contact

Angiv venligst et emne for din forespørgsel og dine kontaktoplysninger.
Tel.: +45 4914 6633 | Fax: +45 4914 6677

Felter markeret med stjerne (*) er påkrævede.

Kontakt

Mange tak for meddelelsen!

Visual contact Visual contact

Din meddelelse er modtaget og vil blive behandlet af vores service center.
Vores serviceafdeling vil snarest muligt kontakte dig.
Til generelle spørgsmål om produkter og tjenester kan du kontakte os på:
Tel.: +45 4914 6633 | Fax: +45 4914 6677

Kontakt

Vi hjælper dig gerne

Visual contact Visual contact

Angiv venligst et emne for din forespørgsel og dine kontaktoplysninger.
Tel.: +45 4914 6633 | Fax: +45 4914 6677

Attachment (max. 10MB)

Felter markeret med stjerne (*) er påkrævede.

Kontakt

Mange tak for meddelelsen!

Visual contact Visual contact

Din meddelelse er modtaget og vil blive behandlet af vores service center.
Vores serviceafdeling vil snarest muligt kontakte dig.
Til generelle spørgsmål om produkter og tjenester kan du kontakte os på:
Tel.: +45 4914 6633 | Fax: +45 4914 6677